What Muffler should I try??? Type IV in Speedster

Well, for the second time the welds that hold the baffles in my muffler have failed and I want a different muffler.

I know that several of you folks with upright Type IVs in your Speedsters are happy with the muffler you are using and Id sure love to know whay brand you have.

We did try a CSP Python but it didn't fit my VS.

Any advice will be appreciated. Thanks in advance!

maybe you need a BETTER welder.
Or , some creative gussetry to spread the load.

Besides , baffles are optional , right ??

Maybe can re-pack it with screen and fibberglass . Summit should have sumpting...

Jack that's such a nice stainless steel exhaust you have! Wonder if a local welder could drill out where the spot welds were, coax baffels back and do a good strong weld on baffels?

Get a Magnafow and be done with it.

Jack, you've said repeatedly that you liked the way my car sounded.
Suzuki 650 ATV muffler. Not sh*t, right off of an ATV. Used.
Stainless, three-bolt flange, 3" inlet. The throughput is nice, and I don't have any breathing problems at higher rpms. But you already knew that ... ;)

Jack,

Get in touch with the guys at Vintage Speed. Someone else had the same problem (on their Type 1) with an earlier exhaust Vintage built. They asked him for a picture of the exhaust for proof he owned it and shipped him a new one within 8 days.

Paul

Jack, I run a DynoMax muffler plus a Magnaflow resonator. Upstream is a BAS 4-1 merged header. Combo is nice for cruising, but can be quite loud a full throttle (that seems to happen a lot!). It's also very quiet at idle.

I will be building Jack a complete new system fir his car/ engine. The reason we tooled up to do our own work in house was because of situations just like this that I di not have direct control of.

Now, like every other part of Jacks engine from the imternals to the oil the exhaust will be built right under my roof on Jack's engine in his car.

I don't plan on making more of these units, I am doing this one because it is required.

http://www.magnaflow.com/02product/shopexd.asp?zone=main&id=9244

Jake doesn't do anything half-way. This should be like an A-1 on steroids.

Thanks, Jake.

All's well that ends well!

This whole thread was worth it just to know about Cory's Suzuki muffler.

We broke some speed laws together on I-81 last April at Carlisle and Cory's car seriously moves and sounds sensational.

Jack, I may still have my old one, if you want it:

Yeah, and I can set you up with some dressy exhaust tips, too:

http://i49.photobucket.com/albums/f254/speedster356/mufflertip.jpg

that looks LOUD!

You guys are killin' me. I think I'll leave this project to Jake.