Anyone (besides me) interested in a 2110 logo for the rear of their speedster? I made this by tracing and modifying the 1600/SUPER emblem that came on my VS and am going to have some aluminum or stainless ones cut by my friend who cuts our Bac Rac products. I may have them gold-plated but I may have them powder-coated depending on cost. I'll clean it up a bit before having them cut, this is just a rough sketch.
Let me know, Will
Replies sorted oldest to newest
That's a nice idea, and a nice offer, Will. 
I couldn't use it, but I am sure others can.
I'd be interested. This ought to turn out pretty cool.
Show us your finished artwork when you get there - I'm interested.
^same here^
SUPER
2110
Ditto. Nice job and idea. Powdercoated Black on my silver Speedie might just be the ticket.......to where I have no idea.
If you're going to sell these you may as well get the other larger engine sizes mocked up and ready too!
OK, heard back from my water-jet-cutter and the emblems in stainless steel will be $20 each, that price is based on me ordering 12 of them.
I will post his CAD drawing tomorrow but need a head-count of interested/committed parties before I commit to a dozen.
Thanks, Will
Are the posts in the same position or are there even posts?
I would be in for one either way.
Jim, I'm not going to do posts (I think) as it would discolor the stainless where welded.
That said, if folks (me) want to gold plate them to match the other scripts elsewhere on the car, the discoloration wouldn't matter.
The $20 price is without posts, I'm not sure what it would cost to have posts installed. If posts are installed, I'll make sure the holes line-up exactly with the stock 1600/SUPER script so they'll be an easy (famous last words) install.
Will 805-550-7865
Put me down for one. If the gold plating option exists and the pins are included, that is even better. I expect an upcharge of course for the plating and the pins, keep me posted, please.
What BobG said ^^
How about 2332?? I'm all about truth in advertising . . .
Frazoo, the problem with one-offs (a couple other guys have special needs (did I just say that?) and wanted different cc's), is that they will cost more. The price I received ($20 each for the 2110) is for a 12 piece minimum.
That said, I'm meeting on Monday with the cutter and I'll ask what one would cost.
I've only had a couple guys committed so we'll wait and see. If more want them, we'll make a run of 12. If not, I may have to see what 2 or 3 at a time would cost. I'll keep you posted.
Will
I'll take one, Will!
Will, I was just joshing. Think I'll stay w/ my 1600 Super. And keep doing my sleeper thing.
I don't even remember what my displacement is. 2056? 2054? LOL.
I would take one if it was "2180"
TRP posted:I don't even remember what my displacement is. 2056? 2054? LOL.
Do you remember the bore/stroke? 2054 is 94x74; sound familiar?
Everyone please read...THIS IS FOR 2110 unless you have 12 or more to order!
I'm in for gold with post or threaded insert?
I'm in for one stainless or aluminum if it doesn't go much over $20. Double stick tape on the back makes for a simpler install than posts. Just sayin.
Post an address and a final fee. I'm in for one.
I'll take one and I don't even have a 2110. You gentlemen forget (or weren't around) the corpse badges. Once the run is done, it's done.
I'd take a dozen of the custom ones we PM-ed about as well, Will.
only 2110 for me
Id be in for one - if you did posts and gold plating id prefer it that way (realizing there would be an up charge)
Hey Stan which ones were those ? Will I might get one after i see your finished work for my tool box?"!
Hey does he make lapel pins 
billet badgess . Bling love it
Stan Galat, '05 IM, 2276, Nowhere, USA posted:I'll take one and I don't even have a 2110. You gentlemen forget (or weren't around) the corpse badges. Once the run is done, it's done.
I'd take a dozen of the custom ones we PM-ed about as well, Will.
Were those the "beautiful corpse" grille badges? Yeah, I missed that one as well...
How many requests make it worthwhile to gen' up some new badges. Us noobs need to rep SOC.
Hey guys, I took my bride on a short stacation at Avila Beach, just got back home.
I'll talk to my cutter tomorrow about the scripts and post the artwork for you to see.
I'm thinking of having them cut from brass, then it would be simple to sweat copper pins in for installation. If they're going to be gold-plated, it wouldn't matter what they're made of but I know some of you wanted stainless, I can't weld stainless...
...but my brother can, I'll check with him as well.
Will:
How is the 2110 emblem project coming along? As I chimed in above, I'm in for one.
Thanks for taking this on!!!
Also, thanks for the daily pics. I really enjoy them.
Panhandle, things got back-burnered but I'll get it going this week.
I'm going to have them cut from brass so I can drill and sweat copper wire studs onto the emblems in the exact location of the stock emblems. That way, whoever has existing holes in their cars, can simply (easier said than done) remove the stock emblem and glue-in the 2110 emblem.
Our business went crazy last month, the best month we've had, ever, so I was too busy to attend to this project, I apologize and will get it going this month.
glad you like the photos, check out today's, it's all dashes and steering wheels, of course Mitch doesn't go for that sort of thing, he's too humble.
Will those look like they would be cool... can you post all the details again with the final specs that you decided on. I am considering one without posts as most of my emblems and badges are aluminum billet. Thanks
"Our business went crazy last month, the best month we've had, ever, so I was too busy to attend to this project, I apologize and will get it going this month."
Great to hear the business is still going gangbusters, Will!
Will: Keep working. Success will follow. Something I heard once.
I'm still in for the 2,110 logo. Brass is perfect - I'll just clear coat it.
No hurry.
Let me know price and shipping when you're satisfied with the look and quality.
Thanks for doing this. It will legitimize my beautiful car and also drive the PCA guys nuts. 
I'm still in for one. No hurry here either.
Thanks for the effort.
Will Hesch posted:Panhandle, things got back-burnered but I'll get it going this week.
I'm going to have them cut from brass so I can drill and sweat copper wire studs onto the emblems in the exact location of the stock emblems. That way, whoever has existing holes in their cars, can simply (easier said than done) remove the stock emblem and glue-in the 2110 emblem.
Our business went crazy last month, the best month we've had, ever, so I was too busy to attend to this project, I apologize and will get it going this month.
glad you like the photos, check out today's, it's all dashes and steering wheels, of course Mitch doesn't go for that sort of thing, he's too humble.
You can't actually believe you owe me an apology? You are the guy with the idea and the get-up-and go to make it happen. I'm just the schlump with a checkbook and a desire for one.
Congratulations on the business success! I'll be here when the badges are available, just let me know.
Bless ya' buddy!
Hey Will!
Is this project still alive. I am in for one if so.
