Well I tried to post the drawing.If anyone really needs them .Just drop me a email to;; oldyelerbh2@earthlink.net I will email them to you (I hope?)
Original Post
Replies sorted oldest to newest
Well I tried to post the drawing.If anyone really needs them .Just drop me a email to;; oldyelerbh2@earthlink.net I will email them to you (I hope?)
An interesting plus about a full sized spare in the original location is that it gives an additional "crush" energy absorbtion quality to the front end in the event of an accident, kinda like a big rubber-baby-buggy-bumper.
Barry,
If you are having a hard time posting them, just email them to me and I will post them for you.
admin@speedsterowners.com
-=theron
If you are having a hard time posting them, just email them to me and I will post them for you.
admin@speedsterowners.com
-=theron
The last antivirus up date is making things act weard.I did email them ,And even that acted funny. I will try a gain after I do some internal skanning,and rebooting
That,s much better It went right that time. I don,t think I caught A bug,it acted more like the hickups . A system wide clean up did the trick,
I hope to see the 3 drawing posted soon they are not that pretty, but the are correct. I hope they are of some help I just got the trunk back into paint, Thursday, and it looks very good.
I hope to see the 3 drawing posted soon they are not that pretty, but the are correct. I hope they are of some help I just got the trunk back into paint, Thursday, and it looks very good.
They are posted in the files section.
-=theron
(Message Edited 8/23/2002 7:56:18 PM)
-=theron
(Message Edited 8/23/2002 7:56:18 PM)
Aha ,Thanks for the help George . I see the drawing are up.
I really need to add some more detailed imfo. Like the side pannels have to be spread out at the top front . mine almost touch the bumper brackets on the sides, and it is wise to cut the floor sections first and glue them in before trying to find the 90 degree cut lines for the sides up near the tank the tops of the side pannels actually fit snug inside the fenders Its best to cut card board patterns and prefit each side seperately , I got lucky,, both were the same. I redid the hood strut with the tire in , and bent it to clear the tire. then straight the rest of the way.
I really need to add some more detailed imfo. Like the side pannels have to be spread out at the top front . mine almost touch the bumper brackets on the sides, and it is wise to cut the floor sections first and glue them in before trying to find the 90 degree cut lines for the sides up near the tank the tops of the side pannels actually fit snug inside the fenders Its best to cut card board patterns and prefit each side seperately , I got lucky,, both were the same. I redid the hood strut with the tire in , and bent it to clear the tire. then straight the rest of the way.
Also If anyone wants copys of the patterns I made and saved I will trace them to paper and mail them to you.Just say the word.