I have a set of Empi bushings exactly like the ones in the picture - brand new but they are 3/4". I just got my new ones that work so I cant use the 3/4". Anyone looking for a set? I used this pic because now (my new ones) because I am too lazy to go out to garage and take a pic of the other ones...if you need me to I will...
Replies sorted oldest to newest
How greasy are the holes?
No grease on those holes...man there is so much we do with this thread
I'd like them - I have the old cramp on clips. Gladly send you S&H costs. I'm in FL too! Can send you address via PM.
Why don't you and mark load up your tools and come wrench on my car for a day! Send me your address and I will send me to you. I'll let you know shipping but can't be more than a few bucks
you do know you can drill or ream the holes larger in those bushings........or even make adaptors to make them smaller too!!!hope you have fun putting them on todd.get some tie raps&some wood blocks to hold the bar in place then tie rap it to the controal arm with the bushings in place & install clamps, tighten slowely alternating from one to another & keep an eye on the bar & keep it where it needs to be.remember when the suspension go's up & down the part of the bar that gos across the front of the car also gos up& down so be sure to make sure it has clearance to move& dont pinch any thing or bust nutten. ( it go's up & down with the car and within the car it moves, my english speaking isant real good coming out of my fingers, but kinda like the wife bouncing up&down as the car does and also some other parts moving independently but caused by it(could be a finger or could be a few other things) or kinda like the lips are moving and so is the finger.....
