Beck rims and hubcaps

The last time I had asked Carey about those rims he said the baby moons and nipple hubcaps would not stay on. This was about three years ago and this problem may be fixed now. In the mean time I decided to change my 4 lug to wide 5.

I am having an issue now with Sierra Madre 4 lug chrome rims and nipple caps .  The gauge of the metal the cap is made of is too thin & rolled edge of the cap flattens when put on the wheel, the 

I've been running those wheels almost 2 years with no problems. Have been over the ton multiple times. Have hit many pot holes. I've never lost a cap. You should probably just use Carey's caps. With or without crests. They are pretty close to what they are supposed to look like. 356C. 

Will, I don't have Carey's rims, but this may help.

The Chinese chrome wheels that came on my car from VS in 2013 (probably the same wheels you have) were just a tad too big to accept standard aftermarket caps. Standard caps would never really seat right and if you tried driving with them, they'd fly off.

So, Kirk found some Chinese caps that were just a tad bigger and this is what he fitted to new builds then (and maybe still does).

I found this out when I ordered some nipple caps from SoCal Imports. I had to return the caps.

I eventually swapped those wheels for some old Mangels, ordered another set of caps from SoCal, and they fit the Mangels perfectly.

I'm guessing that Carey's wheels will accept the same caps as the Mangels, so you might try ordering some caps from SoCal. Here are their baby moons. Or, maybe try ordering just one first (for just $13.50) to see if they fit.

I just spoke with Kirk at VS today and ordered caps to resolve my fit problem.