Skip to main content

Classified postings do not allow for discussion (replies are not allowed).  Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program. 
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.

CB Performance 2109 cc Type I. 15,000 well-cared for miles, purchased new in a 2006 Intermeccanica Speedster. All scheduled maintenance performed. Valves and carburetors were adjusted 200 miles ago by Vintage Spyders of California.

Includes alternator, doghouse fan shroud, heat exchangers, clutch, carburetors, headers, auxiliary oil cooler - engine is complete and ready to run except for the mufflers and exhaust pipe.

CB Performance dyno indicates max 143 hp and 142 ft lbs.

Cylinders, Displacement - Boxer four, 2109 cc
Bore & Stroke - 90.mm x 8mm
Crankshaft - CB Performance forged chromoly, shot peened, nitrited, 8 dowel pins
Cylinder Heads - CB Performance 044, 4 mm x 35.mm valves ported and polished
Horsepower - 140 hp at 5500 rpm
Compression Ratio - 8 1/2:1
Carburation - Dual 44 mm Weber IDF's
Ignition - Bosch 009 Distributor / MSD
Oil System - CB Performance thin line oil sump, oil filter pump, strainer in crankcase
Oil Cooler - Auxiliary oil cooler with fan

Additional information available at CB Performance URL: http://www.cbperformance.com/turnkeys.asp#2109

Asking $2,779, cash. A new CB Performance 2109 cc starts at $5,295, not including the auxiliary oil cooler, clutch and other options included with this carefully-maintained motor.

Why am I selling? Installed a Subaru 2.5L motor in the Speedster.

The motor is located at Vintage Spyders in Stanton, California. Please contact me via email or phone. Thank you.

Rayner Marx
raynman@mac.com
310-629-9708
Original Post

Replies sorted oldest to newest

CB Performance 2109 cc Type I. 15,000 well-cared for miles, purchased new in a 2006 Intermeccanica Speedster. All scheduled maintenance performed. Valves and carburetors were adjusted 200 miles ago by Vintage Spyders of California.

Includes alternator, doghouse fan shroud, heat exchangers, clutch, carburetors, headers, auxiliary oil cooler - engine is complete and ready to run except for the mufflers and exhaust pipe.

CB Performance dyno indicates max 143 hp and 142 ft lbs.

Cylinders, Displacement - Boxer four, 2109 cc
Bore & Stroke - 90.mm x 8mm
Crankshaft - CB Performance forged chromoly, shot peened, nitrited, 8 dowel pins
Cylinder Heads - CB Performance 044, 4 mm x 35.mm valves ported and polished
Horsepower - 140 hp at 5500 rpm
Compression Ratio - 8 1/2:1
Carburation - Dual 44 mm Weber IDF's
Ignition - Bosch 009 Distributor / MSD
Oil System - CB Performance thin line oil sump, oil filter pump, strainer in crankcase
Oil Cooler - Auxiliary oil cooler with fan

Additional information available at CB Performance URL: http://www.cbperformance.com/turnkeys.asp#2109

Asking $2,779, cash. A new CB Performance 2109 cc starts at $5,295, not including the auxiliary oil cooler, clutch and other options included with this carefully-maintained motor.

Why am I selling? Installed a Subaru 2.5L motor in the Speedster.

The motor is located at Vintage Spyders in Stanton, California. Please contact me via email or phone. Thank you.

Rayner Marx
raynman@mac.com
310-629-9708
Typo above, should be bore & stroke 90.5 mm x 82 mm per Intermeccanica specs in manual that shipped with the car. This differs with what's currently on CB Performance site, not sure which is correct for this specific motor. This motor was built and shipped in late 2005 by CB Performance as ordered by Intermeccanica.
Hi Bert,

I don't know if CB Performance will perform installations, suggest you contact Pat Downs (at CB Performance) to confirm. Perhaps more convenient for you, given your location, Vintage Spyders in Stanton, CA can do an install for you. They have lots of experience installing and maintaining CB Performance motors.

Someone has agreed to purchase my motor, will confirm on this forum when it's sold, or contact you directly should the sale fall through. Thank you for your interest.
Hey, thanks Larry. I was just figuring then it wouldn't have to be shipped, etc. If I do buy it I'll get a new transmission also as I've got stock gearing now and it would be a waist to have that engine and stock ratios.

Love to help you with the job also, I'm pretty handy and can certainly fetch food and drinks if I'm less than handy.
Post Content
×
×
×
×
Link copied to your clipboard.
×
×