A few weeks ago, on a pleasant Sunday drive in Carmel I popped my spliced-end clutch cable. I re-spliced on the side of the road only to find that the clutch lever would only
go forward 1/2 inch, exhibiting a solid metal to metal no go feeling with no cable attached.
I drove home in third gear using the starter and ignition at traffic lights.
At home garage I pulled the engine and the fork/lever operated normally.
All parts appear normal and cross-shaft, bearing and pressure plate were replaced a year, 10,000 miles or less ago.
Before I reinstall,what am I missing?
Steve G.
Original Post