Skip to main content

I have been looking to replace the Porsche emblems in my IM with Intermeccanica emblems for a couple of years.  I ordered emblems from Henry but they were not large enough to cover the holes that were drilled by the previous owner for the Porsche emblems.  After a lot of work I found a jewelry maker that hand cuts and finishes script for a reasonable price.  I provided a template of the font and size I needed and am very happy with the results as shown in the attached pics.  The holes drilled for the Porsche emblems are covered.  I installed these using 3M tape.
 
I am not associated with the individual in any way other than as a customer.  If you have a need for custom script and want to try this out the contact email is uniquenaizshan@gmail.com or the phone number is 784-492-3694.

 

 

 

Attachments

Images (2)
  • Emblem 1
  • Emblem 2
Original Post

Replies sorted oldest to newest

The vendor is a lady in the caribbean that makes custom jewelry and who does artwork. I am not aware of a website.  This is not a store with automotive emblems on a shelf.  I looked for over 18 months to try to find someone to make what I wanted.  Based on a lead from this website, I determined a jewerly maker was my best shot. Using the phone and email I worked with this vendorto develop the script I wanted.  If you need something not otherwise available and have the time to have someone make it by hand, this may or may not be a source that can work for you.  It did for me.

Originally Posted by GRA:

The vendor is a lady in the caribbean that makes custom jewelry and who does artwork. I am not aware of a website.  This is not a store with automotive emblems on a shelf.  I looked for over 18 months to try to find someone to make what I wanted.  Based on a lead from this website, I determined a jewerly maker was my best shot. Using the phone and email I worked with this vendorto develop the script I wanted.  If you need something not otherwise available and have the time to have someone make it by hand, this may or may not be a source that can work for you.  It did for me.

I would like something custom. Thanks for the tip.

You are welcome.  Another option is http://www.motorheadjewelry.com.  While their products look great they were much more expensive than I was willing to pay. My script is made from brass. The emblems are had cut with a jewelers saw and then cleaned up and sealed multiple times.  If you look carefully you will see the script is hand made rather than by a machine.  The cost was slightly less than the cost of a Porsche emblem for the front or back of the car.  Good luck!  I hope you are able to find what you are looking for.  George  

Post Content
×
×
×
×
Link copied to your clipboard.
×
×