Hi now I
Original Post
Replies sorted oldest to newest
Hi now I
Hafthorr:
Simon Hambly (username shambly on here) made one of those from scratch for his Chesil. Look here:
https://www.speedsterowners.com/files/view.asp?sf=shambly&f=cc2005%5FDSCN1042%2EJPG
You may have to cut and paste the URL line to get it to display.
Also, I've seen the same type of under-dash panel on some Intermeccanicas, so that ma be a source, too - see their web site.
gn
Simon Hambly (username shambly on here) made one of those from scratch for his Chesil. Look here:
https://www.speedsterowners.com/files/view.asp?sf=shambly&f=cc2005%5FDSCN1042%2EJPG
You may have to cut and paste the URL line to get it to display.
Also, I've seen the same type of under-dash panel on some Intermeccanicas, so that ma be a source, too - see their web site.
gn
If Gordon's link don't work, try this one:
http://speedsterowners.com/files/view.asp?sf=shambly&f=cc2005_DSCN1042.JPG
http://speedsterowners.com/files/view.asp?sf=shambly&f=cc2005_DSCN1042.JPG
Thanks for this guys the link to the "shambly" work but not the another one.but I like what he did to the his dash do you know where I cant get chrome air rist like he are using in his product?
Haffi
Haffi
Hafthor, are you Icelandic by any chance?
Cory Drake. I don't understand your comment and it seams to me like it don
Sorry, Hafthor. I know a fabricator in Hafnarfjordur who may be able to help you. He works on motorcycles. Bardur Smarasson is his name.
thank for this info I was not going to be rude to you. I try to find this baldur in the phone book here in Iceland but cannot find him but I
Hafthor,
You can get the under dash valance from Intermeccania along with the A/C trims or they can let you cut your own holes. The radio cut out can be done for you also. Your biggest cost would be shipping I would suspect.
You will have to cover it with leather or vinyl yourself.
They are located in Canada.
Good luck
Dave
You can get the under dash valance from Intermeccania along with the A/C trims or they can let you cut your own holes. The radio cut out can be done for you also. Your biggest cost would be shipping I would suspect.
You will have to cover it with leather or vinyl yourself.
They are located in Canada.
Good luck
Dave
Hafthor, he is affiliated with Rimmugygur; they do the fight-shows at the Viking Restaurant. Hafsteinn Petursson or Helgi Ingasson can put you in touch with Bardur. Hafsteinn teaches math and computers at the Lake School there. The FBSR-Reykjavik can put you on with Helgi.
Tell them Kari sent you. ;)
Tell them Kari sent you. ;)
Just popped in to so.com and saw this thread...
I bought my vents from these guys - They are only chromed plastic, but very affordable :)
http://www.cbsonline.co.uk/dash-vents-92-c.asp
Mor detail on how I made my dash here:-
http://www.chesiloutlaw.com/phase2_part5.htm
Simon
I bought my vents from these guys - They are only chromed plastic, but very affordable :)
http://www.cbsonline.co.uk/dash-vents-92-c.asp
Mor detail on how I made my dash here:-
http://www.chesiloutlaw.com/phase2_part5.htm
Simon
Jeez---I don't think I'd cross Hafthor---sorta quick to kick your
ass with his Viking mindset! (Not Scandanavian but close).
Cory--man--you are a world traveler for sure. All that spelling of those names--damned impressive, my friend.
Didn't mean to barge in but this was pretty funny to me. I'm sure that Hafthor's english is a million times better than my Icelandic!
Good to hear from you, Hafthor. Please post a picture of your dash when you finish it! ---Jack
ass with his Viking mindset! (Not Scandanavian but close).
Cory--man--you are a world traveler for sure. All that spelling of those names--damned impressive, my friend.
Didn't mean to barge in but this was pretty funny to me. I'm sure that Hafthor's english is a million times better than my Icelandic!
Good to hear from you, Hafthor. Please post a picture of your dash when you finish it! ---Jack