I had asked for info/feedback from anyone who may have a car equipped with electric power steering. I didn't get much response but I did find this unit available from pacificcustoms.com......P/N AC498700 for $580.00 The 7.5 inch install dimension will work. Installed between the steering column and the steering box. There's close to 11 inches in this area on my VS. Anyone have experience with these units ? On Speedsters, dunebuggies, sand rails...etc ?? It looks like a pretty simple install once a substantial support bracket is in place.......Bruce
Original Post
Replies sorted oldest to newest
Maybe Bruce has a medical condition which could benefit from a little assist?
Bill - There is an older demographic getting into Speedsters . Some may have dehabilitations - weak knees for clutches or weaken shoulders for steering or weak bladders. Some are looking for AT, AC, heat and power steering.
And where there is a demand, there is a market. I can't imagine needing power steering on these light and rear heavy cars, but who am I to know? If one goes that way, seems a R&P lash-up would be the way to do it. I hear it is done, but have no useful knowledge about how.
I think IM has installed one before but i dont know what was used.
look here and read the feature list