Skip to main content

Replies sorted oldest to newest

I just finished my 2007cc engine and I am trying to get the carb tunned, weber 44IDA's. It is running good except for that when I first step on the gas it stutters and dosen't want to go, but if you give it more gas it takes off. Does anyone know what this might be or how to figure it out. Thanks
Check your float levels, then the idle jets for cleanliness. If you have 36mm venturis and F11 emulsion tubes 52.5 or 55 idle jets, 140 mains, 190 air corrections, and 50 pump squirters should be about right at sea level.

If your carbs have F2 emulsion tubes try 145 mains and 175 air corrections with the rest of the above jetting.
Post Content
×
×
×
×
Link copied to your clipboard.
×
×