engine vibrations

Former Member

i recently dropped my engine and trans for repair( trans problem). after getting everything back together i have notoiced excessive vibrations. nothing is standing out as the main problem. i have a 2110 engine. any advice is much appreciated. thanks.

5/19/055:47 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Former Member

5/19/055:47 PM

❤️ 0

Former Member

When you put the engine back in did you rebalance the carbs? I have to start with the obvious?

5/19/056:11 PM

❤️ 0

hedfurst

Does it have the excessive vibrations at idle? When you rev and hold it or when moving down the road under power?
It may be helpful to know what you repaired or just what was disassembled.

5/19/056:35 PM

❤️ 0

hedfurst

Sorry, just noted that it was t'axle probs. Could be the mounts or perhaps the half-axles aren't bolted up right?

5/19/056:39 PM

❤️ 0

Former Member

I second Fred; check all your rubber mounts; they could be shot. If so, replace with OEM as urethane is extra hard and could worsen the vibration problem.

5/19/057:44 PM

❤️ 0

Former Member

thanks for the help guys. just to let you know it was the most obvious, it was the carb's as well as the points. both needed adjustment.

5/27/058:52 PM

❤️ 0

Former Member

thanks for the help guys. just to let you know it was the most obvious, it was the carb's as well as the points. both needed adjustment.

5/27/058:53 PM

❤️ 0