So, I opened up my door panel found out that the button is not sitting around inside it. it's actually fell out and it fell out because I don't have any of the other parts.where can I locate those parts? we are talking about the rod that goes down, the button, the screws ago and the back of it this is on a cmc. Thanks.
Replies sorted oldest to newest
Someone here might have an old pitted one you could use for parts. Here's part at VintageSpeedsterParts for $30 (but a flat $25 shipping fee). It doesn't include the rod though. Rod appears to be a bent piece of electrical conduit - so dupe one on the other side. CMC build manual has some drawings and parts photo too.
http://vintagespeedsterparts.com/356doorhandle.aspx
Inside shot of my door handle setup.
MG MAgic has orginal CMC parts - Handles are $60 each though.
http://www.mgmagicclassicmotorparts.com/speedster/
From Build Manual -
I'm not sure if the Speedster mfg. still use this but one could inquire, it not available the rod is 3/8" tubing available at Lowe's ( $5) etc that has a metal rack. If you don't have one to copy you can make up a template from coat hanger and bend the tube. Cutting in the slot and bending it open is simple too.
