Fender well liners

About 6 months ago I believe there were a series of posts here concerning various ways to make and install fender well liners.

How do I go about finding old posts on this site?

Can anyone place a reference here for this particular subject?

Brian

In order for you to post your question,you went to "General(non technical)".If you go back to the main forum page,look for the "search" option. Just to give you an example,I went to "search" and typed the word "liners".This is what came up: https://www.speedsterowners.com/forum/search.asp?searchterm=liners&byforum=ALL

Good luck.

Lambros,

Did you actually look at what your search returned?

It seems like most of your search results had nothing to do with fender well liners.

Most of the time when I try the search functions this kind of thing happens.

Mike

Trim the liners to fit, use hex driver head self tapping screws to attach the liners to the 1" metal bumper supports, fiberglass or use 3M seam sealer (my quick and easy method) to bond them to the inner body areas.

Mike

Now that you pointed out,I went back and looked at the results. You are right. I just wanted to give Brian an example on how to "search" this site.

My question wasn't so much about attaching prefabed liners as it was about making them. I thought I remembered seeing a few posts concerning various materials that had been used and how they were made & installed. I have tried the "search" function, but only have found mention of installing ones supplied with Speedster kits.

Perhaps the posts that I'm thinking of are to old to come up in the "search".

Yeah, I remember that thread too but now can't locate it. IMHO they are used in production cars to absorb impact of stones and, mostly to keep thrown up mud and water from collecting and rusting the fenders - hence not really needed on thick fiberglass replicas not typically driven in rain and mud. Guess if real 356, 914 and early 911's had had them there would be a whole lot more still on the road! Here was one related thread I found that is probably all you need. https://www.speedsterowners.com/forum/readmsg.asp?t=3226

Brian, I have only used these on one build, not really necessary ~Alan

Thanks guys, I appreciate your input.

Brian,
Make sure that the dash vinyl extends at least 1/4" onto the bottom windshield aluminum piece or this will show under the rubber piece. ~Alan

Lookin good Brian! Nice progress!