Front Suspension Work

Scott57

So this is my first speedster and I'm learning as I go. My CMC wide body has a sag on the front drive side. I knew that the upper ball joint was toast before hand, possible causing the issue. While I'm replacing, is there anything else I should replace while I'm working on the front? Also trying to figure out if I have dropped spindles or how it's lowered? I'm not sure what to look for.

The Monroe front shocks were purchased in 2012 (from PO receipt) and installed (less the 3,000 on them). However, the front rebond is really slow (about 3 sec to return) after pushing down on the front? They are acting like they are done? The rear rebound is normal.

Attachments

Hide

Images (7)

6/3/144:49 PM

❤️ 0

Original Post

WOLFGANG'89 CMC FWB, FL Supporting Member

Take a picture of the center of the front beam - upper and lower. This one has welded in AVIS adjusters top and bottom.

6/3/145:20 PM

❤️ 0

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Attachments

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Premium Membership Required

Supporting Member

Please help keep us running!

Please wait...