Skip to main content

Closed6 replies

Fuse block -wiring help

FM Former Member
I have the manual and picked it up and checked out wiring scheme but i dont see where it is suppose to mount? I bought a partial kit and thought about knocking out the wiring this weekend. Its like a little glass fuse block that is maybe 6 inches long, does it mount u under dash to the body? Or to the frame?

Im not quite sure how its suppose to be wired up. I have turn signal , ignition switch, tail lights and head lights then the rear engine / tail lights wiring coming up from the back. So am i suppose to just start butt connecting all the wires to one side of the fuse block? I dont see it spelled out well in the manual so i figured i would ask for experienced advise here.

Also the loom of wires coming from the back, where do i run them? Along the outter frame rail or down the middle by the shifter column?

Anyone got pics of mounted fuse block..

I was diggin through the parts and i found the NEW in wrapper FIBERFAB horn button!

thanks in advance
Original Post

Replies sorted oldest to newest

FM Former Member
I have the manual and picked it up and checked out wiring scheme but i dont see where it is suppose to mount? I bought a partial kit and thought about knocking out the wiring this weekend. Its like a little glass fuse block that is maybe 6 inches long, does it mount u under dash to the body? Or to the frame?

Im not quite sure how its suppose to be wired up. I have turn signal , ignition switch, tail lights and head lights then the rear engine / tail lights wiring coming up from the back. So am i suppose to just start butt connecting all the wires to one side of the fuse block? I dont see it spelled out well in the manual so i figured i would ask for experienced advise here.

Also the loom of wires coming from the back, where do i run them? Along the outter frame rail or down the middle by the shifter column?

Anyone got pics of mounted fuse block..

I was diggin through the parts and i found the NEW in wrapper FIBERFAB horn button!

thanks in advance
Alan MerklinAlan MerklinDrclock - Elkins, West Virginia Supporting Member
The location I mount the fuse block is on the upper part of the left kick panel, it is out of sight but be carefull not to install it too close to the 2x2 dash cross brace, also allow for the hood hinge to clear and still be able to access the fuses.

Run the rear engine / light harness in through the rear of the floor area , I use grommets to avoid chaffing the harness) and along the left side of the floor where it meets the vertical side of the floor pan, along the 2x4 box frame and up to the box on the upper part of the kick panel.

Personally, I only use the VS harness as it is easy to install, if you are running halogen headlights then you'll have to add a heavier 10 gauge wire from the fuse block out to the lights.

Alan




Post Content
Remove This Ad

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires a premium membership.

Supporting Member

Please help keep us running!

Supporting members have donated about $4.00 a month ($49.00 US per year) paid annually.

  • Priority support
  • Removal of inter-page (between thread) advertisements.
  • Access to Build Manuals
  • Access to Knowledge Base
  • Access to Supporting Members events.
  • Access to Leveraged Group Buying from site Merchants.

AUTO RENEW: You membership will auto-renew after 12 months. If you prefer not to auto-renew, you can cancel your premium membership at any time and it will remain in effect until the end of the 12 months. To cancel, sign in at SpeedsterOwners.com and navigate to: (Your User Name)  > Premium Membership.

PLEASE NOTE: Your credit card will receive a charge from CROWDSTACK PAY, the payment processor, not SpeedsterOwners.com.

$49.00 per 12 Months (plus tax if applicable)
×