"German look" muffler with heaters Type IV ?

Hello

I just purchased a 914 2 Liter (GB-type, 100 hp) engine
and need to get a new exhaust.
I would like to have a "German look"(original look) style.
I have seen on Vintage Speed that they have these mufflers:
http://store.vintagespeed.com.tw/index.php?option=com_virtuemart&page=shop.browse&category_id=8&Itemid=80

Part no.155-203-43500 and part no.155-203-450SF

I have asked Vintage Speed but they couldn't help.

The problem is that I also would like to have heaters on my system (I live in Norway).
Do anyone knows what kind of heaters would fit these mufflers
(or any other "German look" style mufflers) ?

Have done quite a lot of search on this on google and here, but have not found a good solution yet.
It's a 2008 VS car.

Rgds
Ove

Ove, have you tried Tangerine Exhaust. If I'm not mistaken you can get a custom exhaust through him (Chris Foley) with heater boxes. Excellent stuff, big bucks. http://www.tangerineracing.com/TangerineHeaders.htm

Rich- thanks for your suggestion- but these
systems are a little "out of my league" :-)

Rgds
Ove

Sorry, Ove, you might have to think of a gas heater.

Ove-I am unfamiliar with the exhaust/heater-box setup for the type4. You might want to check 914World or RoadGlue forums to see if there are any comments posted.
Also check PelicanParts (dotcom). Select Porsche, then 914 for a catalog of 914 parts.
Here's an article that may be of interest: http://www.tunacan.net/t4/tech/exhaust-porsche.shtml
Also you might check with Jake Raby regarding any type4 issues: you won't find a better source for the CORRECT info.
If you are "mating" the type 1 heater boxes to a type4 exhaust (header) I have no knowledge of how to do this.
Jack Crosby (a site-member here) has a Raby-built type 4 in his speedster and, I believe, he has an auxiliary heater as well.

Also, if I recall correctly there was a company called Dansk that used to make heat exchangers or heater boxes for the air-cooled vehicles. I'll watch this thread to see if I'm on the right track with what you are trying to accomplish. Good luck!
SS

Ove, what type of vehicle are you going to put this engine into? A Speedster?

Slater
Thanks for info, this will be an upright type 4 innstallation- so it's not going to be
a 914 exhaust...

Rich - it's going into my 2008 Vintage Speedster :-)

Rgds
Ove

I think this guy at A-1 muffler makes an exhaust for what you are trying to do: Contact "Tiger" at (714) 836-7201. He is in Santa Ana, CA. and will ship worldwide.
Good luck.
SS

I highly discourage heater boxes with any TIV conversion. We don't even try to incorporate them; you will spend more money to set it up correctly than the Espar heater costs. I don't even offer the heater solution unless its an Espar, all my personal cars are the same way.

http://www.socalautoparts.com/product_info.php/dual-quiet-pack-exhaust-system-for-bug-type-motor-black-wchrome-tips-p-16822

Thanks for all replies.
Jake: So maybe heaters are not the way to go then, will check up
on petrol heater.
Mangosmoothie: Nice setup / price- but I think
I would like a more standard look on the tailpipes.

A1 is probably good as well- but doesn't have the classic look.

rgds
Ove

Ove, you can get a center outlet from A-1. If I'm not mistaken, Troy Sloan had some photos up of that very look, though it was for a Type 1.

Ove - for that price - just use the headers and fab up the rest. sell the mufflers (or cut it up to use in the fab process)

my raw 1 5/8" A1 sidewinder header alone was quite a bit more than that.