Does anyone have a set of guages they are wanting to sell to help complete a CMC widebody project?
Also looking for the following parts:
roll bar
top bows
header
Any help in locating parts would be greatly appreciated.
Jim
Original Post
Classified postings do not allow for discussion (replies are not allowed). Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program.
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.
Replies sorted oldest to newest
Does anyone have a set of guages they are wanting to sell to help complete a CMC widebody project?
Also looking for the following parts:
roll bar
top bows
header
Any help in locating parts would be greatly appreciated.
Jim
Also looking for the following parts:
roll bar
top bows
header
Any help in locating parts would be greatly appreciated.
Jim
Jim
I have a take out new roll bar from a CMC/ Fiberfab on ebay . It has an additional horizontal cross bar .........see pic at Alan M.
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2474651307&ssPageName=ADME:B:LC:MT:1
I have a take out new roll bar from a CMC/ Fiberfab on ebay . It has an additional horizontal cross bar .........see pic at Alan M.
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2474651307&ssPageName=ADME:B:LC:MT:1
Jim,
I have a complete set of VDO gauges. If you are interested contact me at artwizard@earthlink.net
Tony
I have a complete set of VDO gauges. If you are interested contact me at artwizard@earthlink.net
Tony
I have a complete unused set of the CMC "OEM" Classic gauges - silver bezel with white faces. Includes Tach/speedo w/trip/amp/oil pressure/oil temp/fuel with all sending units and install instructions. Make me a reasonable offer.
Jim, I'd give Vintage or JPS a call on the top bows and especially the header that fits on the windshield. The CMC header is a complete headache
as they fit poorly over the w/shield frame. If you don't have them already, you'll need the left and right hand bow brackets that mount the bows to the body. The above mentioned should have these also.
BD
as they fit poorly over the w/shield frame. If you don't have them already, you'll need the left and right hand bow brackets that mount the bows to the body. The above mentioned should have these also.
BD
Alan - Sent you an e-mail about the roll bar.
Tony - Sounds like a great deal, but wife wants white faced gauges.
Gregory - Sent you an e-mail about gauges. Definately interested.
Bill - Thanks for the heads-up about the CMC header. Have heard a few others talking about it not fitting correctly.
Any one out there have any bad experiences with either the Vintage or JPS headers not fitting correctly over the windshield? Still looking for the top bows if anyone has an extra set.
Thanks again,
Jim
Tony - Sounds like a great deal, but wife wants white faced gauges.
Gregory - Sent you an e-mail about gauges. Definately interested.
Bill - Thanks for the heads-up about the CMC header. Have heard a few others talking about it not fitting correctly.
Any one out there have any bad experiences with either the Vintage or JPS headers not fitting correctly over the windshield? Still looking for the top bows if anyone has an extra set.
Thanks again,
Jim
I think I have an extra set of the tabs for the bottom of the bows.
Ben
Ben
I got rid of my CMC bow and had Kirk at VS get me one of his. Much better.
Lance,
Did you replace both the bow and the header? So the vintage is a better fit. Thanks for the info.
Jim
Did you replace both the bow and the header? So the vintage is a better fit. Thanks for the info.
Jim
Well, the list is getting shorter and shorter. Thanks to Alan for the roll bar and Gregory for the gauges. Sounds like the best option for the header is through Vintage.
Ben, I am not familiar with the tabs for the bottom of the bows. If it is something that is needed for the top to work properly, I am interested. Shoot me an e-mail with price and description.
Once again, thanks to everyone for all the help and advise with this project and especially Theron for this site.
Jim
Ben, I am not familiar with the tabs for the bottom of the bows. If it is something that is needed for the top to work properly, I am interested. Shoot me an e-mail with price and description.
Once again, thanks to everyone for all the help and advise with this project and especially Theron for this site.
Jim