Classified postings do not allow for discussion (replies are not allowed). Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program.
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.
Hello All,
We just got in our gauges (U.S.A Made) that actually work and come with a lifetime warranty. Yes, life time.
Speedo is GPS with trip meeter
Compi Gauge comes with correct sending units for oil or water temp
Tach has optional shift light
Check them out and let me know what you think.
Alex
Vintage Motorcars Inc
Stanton, CA
Replies sorted oldest to newest
They look nice, and while the combo gauge is laid out differently, it is clearer. I do have to ask where the idiot lights (oil, alt, turn signals, etc.) are.
How much?
What's the outside diameter - 100 mm, 105 mm, or ??
All good questions...oil-alt-hi beam-turn-diameter and origin of mfg......Bruce
aircooled posted:All good questions...oil-alt-hi beam-turn-diameter and origin of mfg......Bruce
Hi Guys,
The Oil-alt are in the Tach so you can see then through the steering wheel, the high low beam light is on the Speedo.
The gauges are 102mm and 108mm. We have them in both sizes for the guys that have no holes in the dash (102mm) and replacement of existing gauges (108mm).
The factory I think were 103mm.
MADE IN THE USA
LIFETIME WARRANTY!!!!!!
Price is $1095.00 (includes all the sending units and instructions).
Now, we know they are not an exact replica of the originals, but our goal here is to have excellent quality functioning gauges. We have battled a long time to find a reasonable solution to the China gauges that everyone has now that are not an exact reproduction and never work or last.
I'll have to pull a gage out of my VS and measure the hole cutout diameter?
Nice job on getting the custom artwork on those guages, I had investigated those speedhut guages at one time. Nicely done R&D for sure.
Alex, is the tach available in the larger original Spyder size? I believe the same size as the big 911 gauges, although I don't know the measurement.
Michael B (aka bluespeedster SoCal) posted:I'll have to pull a gage out of my VS and measure the hole cutout diameter?
Hello Michael,
The gauge we made as the VS replacement is about .5mm (half mm) bigger so you might have to sand just a bit to open the hole. The size worked out good because some of the VS gauge holes are loose for the gauges that are in there now, so this will work for those cars. Hope I explained that well enough, its early here and coffee has not kicked in yet.
DannyP posted:Alex, is the tach available in the larger original Spyder size? I believe the same size as the big 911 gauges, although I don't know the measurement.
Hi Danny,
We should have those in shortly.
Michael B (aka bluespeedster SoCal) posted:I'll have to pull a gage out of my VS and measure the hole cutout diameter?
Your VS most likely has the older style gage set which are 105mm (The gage not hole). Original 356 gages are 100mm.
North Hollywood Speedometer can rebuild your old gage set to better than factory new if you want to preserve the original look. I had mine redone there and had them replace the plastic center with metal. I think they look pretty authentic.
I do not think I heard a response on the turn signal indicator.
majorkahuna posted:I do not think I heard a response on the turn signal indicator.
Yes, it's in the tach gauge. The gauges have all the indicator lights you will need plus one for I don't know what. So your covered. They are all LED lights and very visible when in use. The back lighting on the gauges is very nice as well. No more flash light to read them at night.
Is this Alex who used to work at Roland's shop? If it is then hey man how you been?
Rusty S posted:Is this Alex who used to work at Roland's shop? If it is then hey man how you been?
Yup, that me man. Rusty with the IM?
Vintage Motorcars - Alex posted:Rusty S posted:Is this Alex who used to work at Roland's shop? If it is then hey man how you been?
Yup, that me man. Rusty with the IM?
That's me!
Vintage Motorcars - Alex posted:Rusty S posted:Is this Alex who used to work at Roland's shop? If it is then hey man how you been?
Yup, that me man. Rusty with the IM?
Would you look at that? Look at that. And it didn't even take Maury Povich to reunite you two. 
Robert M posted:Vintage Motorcars - Alex posted:Rusty S posted:Is this Alex who used to work at Roland's shop? If it is then hey man how you been?
Yup, that me man. Rusty with the IM?
Would you look at that? Look at that. And it didn't even take Maury Povich to reunite you two.
Hahaha, that's funny..
Hi Guys,
Have an update on the gauges.
As mentioned before the Speedo is GPS, but found out it has a lot of features. List is bellow:
Odometer and trip
dometer shows up to 999,999 (Miles or KM) Trip shows up to 99,999.9 (Miles or KM)
Clock
Elevation: Now you can tell how high you are.....
Speed: MPH or KMH in the Display
Direction: North, South, East, West..
Top Speed: Shows top speed reached
0-60: Shows 0-60 time
1/4: Shows 1/4 mile time. (no need to wait for track day)
MADE IN USA
LIFETIME WARRANTY
