Skip to main content

Wondering if anyone else has had this steering wheel issue? I have a 2008 VS. It came from Kirk with a wooden steering wheel (not a Nardi, but similar with a 6 bolt adapter/hub). I decided I wanted to replace this wheel with an actual Nardi, so i purchased a used one. It has what I thought was the same size 6 bolt pattern, but turns out it is not the exact same dimensions. It's just barely off! Has anybody run into this issue? I guess i need to buy an entire new hub adapter? Thanks for your thoughts / suggestions. 

FullSizeRender-5

FullSizeRender-4

FullSizeRender-3

Attachments

Images (3)
  • FullSizeRender-5: Original hub
  • FullSizeRender-4: Original wheel installed. Nardi on seat.
  • FullSizeRender-3: Original Wheel from VS (not Nardi)
Original Post

Replies sorted oldest to newest

Momo bolt pattern is 70mm circle, Nardi is 74mm. You just need a new hub/adapter and you'll be good.

 

I found this with a quick google search:

 

"the Momo hubs use a 2 3/4" bolt pattern while the Nardi hubs use a 2 7/8" bolt pattern.
a Momo bolt pattern boss / hub is (70mm PCD) a Nardi bolt pattern boss/hub is (74mm PCD)
MOMO, ISOTTA, NRG, Sparco, and most other 2.75 inch bolt patterns
Nardi, Personal, Tekniq, and most other 2.875 inch bolt pattern"

Last edited by DannyP

We used the same column as VS long ago, so I have a bunch of Nardi adapters for this column in stock if anyone needs one.  These wilt fit any CA production Beck with a stock column but will NOT fit any post '94 Beck.  Just about every Vintage Spyder, Vintage Speedster, JPS and CMC/Fiberfab we have ever serviced had this same column, however we cannot be 100% sure what column your builder used, so keep that in mind.  

They are the solid version adapter, powder coated in a wrinkle black finish.

$50 for forum members, shipped anywhere in the lower 48, while they last.

Originally Posted by chines1:

We used the same column as VS long ago, so I have a bunch of Nardi adapters for this column in stock if anyone needs one.  These wilt fit any CA production Beck with a stock column but will NOT fit any post '94 Beck.  Just about every Vintage Spyder, Vintage Speedster, JPS and CMC/Fiberfab we have ever serviced had this same column, however we cannot be 100% sure what column your builder used, so keep that in mind.  

They are the solid version adapter, powder coated in a wrinkle black finish.

$50 for forum members, shipped anywhere in the lower 48, while they last.

That's a good price... Less than what i paid a month ago from VS.

 

Ted

Post Content
×
×
×
×
Link copied to your clipboard.
×
×