It's embarrassing to reveal how stupid I am...but I need help!
I removed the VS high bow fabric top to re-glue the two fabric pockets across the inside of the top that hold the two curved bows in position. But I didn't pay attention to the body/bows attachment mechanism...and now I'm totally confused!
Removing the top was a PITA removing the wheels and working blind high in the wheel well on the single, rusty, 2 3/8" body attachment bolt. Reassembly, even if I remembered how it goes together, isn't going to be easy either. Can someone provide a photo of the attachment?
The flat steel attachment bar is 4" long with a small 90degree thumb lever welded at one end. The through body mounting hole is centered I/2" at the other end with the second hole spaced 1 5/8" from it toward the center.
