Skip to main content

Replies sorted oldest to newest

Thanks a lot Jim,Stan.
All it took was 10 bucks and two hours of my time.I went to the parts store and got "Brite touch" General purpose primer.I did 3 coats of primer(10 minutes apart).Then I used "Dupli-color" high performance wheel coating (2 coats,10 min apart).I made sure the hubs were clean prior to paint with steel brush.The original plan was to buy dram skinz from fibersteel but I had no clearenceso that was my next step.How do you like my new steering wheel and bezels? Thanks again
Lambros
TC
Belive it or not it is Grant.The car came with a "small" Grant steering wheel so the adapter was there so I thought to check them out.So I found this one and I love it. If you go to www.grantproducts.com the part #992 and the price is 153.87.Also you can find it at www.summitracing.com part #GRT-992 for 107.69.It is a genuine hardwood walnut finish with finger grips and rivets. Again Moto Lita was the original goal but I found this one. Very happy.Let me know if you have more questions.
Hey Bruce


My last steering wheel was Grant also so I didn't have to buy the adapter. I got my steering wheel from www.summitracing.com part #GRT 992. About the horn button yes, it came with the Porsche crest.If you are interested in buying the same steering wheel, find out (or I can measure for you) the horn button diameter and then you can order a new one from MOMO.If you have more questions let me know.
Lambros
Post Content
×
×
×
×
Link copied to your clipboard.
×
×