Horn Button

I have ordered a new Beck Horn button (the original is worn). Does anyone have pictures on the website how to replace that part? It seems to be spring loaded; however, it is not funtional. My horn activates using a gold button on the dash. v

Hi Vicki, How have you been???

If my memory serves me correctly, remove the allen head bolts that surround your horn button, remove the wheel and then replace the horn button.

I've got to ask, if that button doesn't work, why is it worn???

Hey, LJ. I've been very well, thank you. And I'm much better now that my clutch plate has been changed. Should have taken care of that a long time ago.

The button's color has worn off from weather exposure and I probably play with it some, I confess. v

Hey, thanks for the advice about the horn button. I bet I can do that by myself. Do you think? v

I'm sure you're multi-talented so::::::
If you can turn an allen wrench then you """can do it""

Vicki, I've covered this before somewhere here and on the SpyderClub

This is a re-print of how to make the horn button work on your BECK and also change the current horn button to a starter button, if you print this and give it to your mechanic, it should take him about 2 hours to complete



First thing, please don

Part 2

I then transformed my original dash mounted horn button to an engine start button.

This too is easily done. Remove your ignition switch. Using a 12 volt test light, determine which wires on the side of the switch are hot (use a test light for this function)

Next, remove the wire located on the end of the switch. It

LJ--you are the original tinkerer.
This doesn't look difficult to me. psych