Hoses to oil filter

I have my oil filter mounted to the 2 x 2 frame on the driver's side of the engine.

The two hoses pass between the exhaust pipes.

Can anyone suggest a way to hold them in place between the pipes so they don't get too close to the hot pipes?

Thanks.

small section of header wrap around the pipe, Use two Adel clamps(remove silicone on the header pipe side), mount the clamp around the header pipe(on top of header wrap), slip[ the other Adel over the oil hose. Secure together with same bolt. This will provide security and
a stand off so no chaff or contact. You can also use a longer bolt and spacer (tube) to provide more separation between header and hose.

Looky here;
http://www.repucci.com/bill/things/safety%20wire%20adel%20clamp.jpg

http://www.hrpworld.com/index.cfm?form_prod_id=829,24,363_4218&action=product

http://www.hrpworld.com/index.cfm?form_prod_id=837,587_82&action=product

I just took my old fiberglass header wrap off, and was going to send it to TC for later misuse -- you want a small section of it so you don't have to spend the kids' inheritance on a whole roll?
(Then TC can have the remaining 40-odd feet.)

Anything else of mine you feel like givin' away?

Oh, yeah. I've got this CMC grille ...