I have a cmc speedster built in 83. It has a hydraulic clutch system. The master cylinder rod going from the master cylinder to the couch pedal broke in half. How do I get to the master cylinder and how can I repair the shaft.
renfrance
Replies sorted oldest to newest
Should be where the stock master cylinder is if you have VW pedals. So remove left wheel and look there. It probably can be rewelded - of if maker on it - replace it.
Wolfgang
thank you for the information. I will remove the left wheel and check for the master. I looked without removing the wheel and did not locate it. However, I may have a better view with the wheel removed.
thank you
Renfrance
Just follow the brake lines.
If it's not right next to the brake master cylinder, you might have one mounted within the tunnel like I had for a while. If so, there should be an access panel on the tunnel under the carper on the passenger side. Pictures of the pedals and brake MC area would help us help you.
