screwdriver, 1 1/4" long, think I bought it for the weber jets?
Original Post
Replies sorted oldest to newest
Rattle can it blue.....
Why blue- does it have something to do with papa Smurf?
...because blue and screw rhyme?
Were you using it in a swimming pool?
Been one of these in the car for many years...along with my snail gauge.
As long as they don't call you STUBBY
This is cool enough, but NOT the answer. It's still a slotted screw that you cannot see, and it slip[s from one side to the other, and will drive you nuts. And as short as it is, there is scant room for it. The answer my friends is blowin' . . . ooops, I mean the answer is the hex-head jet holders. A little pricey for what they are, but really the right tool for the job. A ground off allen wrench gets the job done in nothing flat, and you do not have to see it to get it right. All four jets in and out in about 10 mins. The only warning to give here is be sure NOT to let Lane change 'em out for you.
And watch for any stray Brass Thingies that look as if they're about to take flight across your garage.
Mine is shorter-I made it out of a dental mixing spatula-5/16 inch with a handle. As El Frazoo said it is a pia to use.
Joel