Skip to main content

Replies sorted oldest to newest

Just looked under the dash, what a mess.  I think I would rather pull my finger nails out than tackle that right now.  There is only one screw holding the speedo in place, of course it is the top screw, at least I am getting fairly good at guessing speed based on either rpm or general needle position of the speedo.

I do appreciate the input.

There were a number of different length speedo cables used.  Yours is probably a stock VW Beetle cable at 48.62" (1235mm)

Start by looking here:    

https://www.bugcity.com/shop/s...ry=speedometer+cable

You want the longer cable for the 1950's through 1970-ish, so look at 113957801AG.

It might help to call the Bug City guys - they are VERY knowledgeable and can help to make sure you get the right threaded end for your Speedo - they used a different end for the Super Beetles (SB) which might not work on your speedo.  Tell them your speedo is the same threads as the std Beetle sedan for 1954 - 1974, but you need a cable 6"-8" longer (tell them why and what it's going into....They'll know how to help.

Toll Free: 1-888-BUGCITY (1-888-284-2489)

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×