I am looking to buy a set of the allen head idle jet holders for my IDF 44 carbs. It looks like Piersideparts.com carries them. When placing the order you have to chose the size .60, 1.00 or 1.20. Anyone know what is the standard size for the 44? I thought all the IDFs use the same size.
Thanks
Replies sorted oldest to newest
When I bought mine from CB Performance the description just said it was for Weber IDFs all sizes. I checked the Cb site and they are no longer carrying them.
I went to Piersideparts.com and I got an error message saying the domain is for sale so I couldn't check for you.
Jet holders fit all size idle jets for the Weber's. Idle jets are not included. Also look at installing jet doctors. If you're having to clean your idle jets frequently the jet doctors will nearly stop that.
The Jet Doctors from CB Performance that fit the Weber 44 IDF do not actually hold the idle jets. The idle jets on the 44 IDF are on the side of the carburetor. The idle jet air inlet is on top of the carburetor. The jet doctor raises air hole that feeds the idle jet so dirt doesn't get in. I agree the jet doctors will help reduce the amount of dirt that gets in to the idle jet circuit. The allen head idle jet holders makes the removal of the actual idle jet much easier.
The JayCee allen-head idle jet holders for Webers should be standard. Especially on a Speedster.
Every part Jack Sachette makes is class, works, and is made to a higher standard. His stuff is the example EMPI should follow. We can only hope this happens since EMPI bought JayCee.
Got them ordered thanks
