looking for a couple of flanges

I just picked up a set of two to one headers and now I am in search of a set of flanges. The three pictures show what is going on and what I need to match up with.

Cory, got your call, but I had already picked up the copper gaskets. thanks for thinking of me.

Or if you know what this flange is called, I suppose that would help my search too.

Looks like you are using the headers out of a 75-79 bus. I don't know that you can buy just the flanges and it has been a while but i think you can make header collector flanges for a smal block chevy work, you may need to modify the holes some-what. Another alternative is to get the oem exhaust eliminator from Bugpack, CIP1 sells it for about $48 without the muffler and it could be the start for a custom made exhaust. Check it out here:
http://www2.cip1.com/PhotoGallery.asp?ProductCode=ACC%2DD%2D2034%2D10
They sell the proper gaskets as well. You can always buy the gaskets and get some 1/4 plate and make your own but that is a lot of work unless you have the proper tools.

Thanks Kristian

I think that is what I am looking for, thanks for the leg work. I have found a Bursch muffler system that seems to work, but I have call into them to make sure that the measurements work out.

Give a call when you get a chance. I have one of those hoobeydoos on my exhaust now, too. I'll ask at Peek in the morning.