Im looking for 2 pairs of velocity stack horns 2.5”, for my 44 Webbers, which were missing when I got the car. Does anyone have some they are looking to part with? Or where can I get a good quality set?
Original Post
Classified postings do not allow for discussion (replies are not allowed). Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program.
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.
Replies sorted oldest to newest
Try CB Performance:
I think mine are 2.25" high, make sure you'll have plenty of room above the stack to the top of the filter cover.
Maybe these? Free shipping and $48.95
DannyP posted:I think mine are 2.25" high, make sure you'll have plenty of room above the stack to the top of the filter cover.
I agree, 2.25 will be the right size
Just so you know, @Mike Naz 356 (and this pertains to you as well, @DannyP)- I have read that the air cleaner top only needs to be 25% higher than the diameter of the carb intake (40mm carb needs 10mm clearance from air horn, 44/45 needs 11mm and 48 needs 12mm) from the top of the air horn to feed the carb properly.
ALB posted:Just so you know, @Mike Naz 356 (and this pertains to you as well, @DannyP)- I have read that the air cleaner top only needs to be 25% higher than the diameter of the carb intake (40mm carb needs 10mm clearance from air horn, 44/45 needs 11mm and 48 needs 12mm) from the top of the air horn to feed the carb properly.
Thanks. Looks like the Webber standard size is the 2.25”. I’ve placed the order already. My understanding is any of the longer ones will give higher speed and sacrifice lower end torc. With brakes on these cars, I’d prefer to keep a reasonable speed.