I am looking to add a little more voice from my exhaust. It currently has a custom merged header with two Magnaflow mufflers. Its throaty but soft with the Suby water cooled engine. I am looking for a little more falsetto when I step on the throttle. Nothing to crazy but something a bit more aggressive. What are some options.
Replies sorted oldest to newest
When you look in the dictionary under "Speedster Madness" you will find your picture, my friend. it just goes to show you that no matter how much one knows when they spec their car or the quality of the build the madness will NEVER end :-)
Sounded pretty good to me last weekend!
why not just pull off one of the muflers to try it out. i'm running one magnaflow (looks like the same one you have in your inner rear fender) and i like the sound.
idles kinda of lumpy and at WOT i honestly can't help but have a stupid smile on my face.
I'm with Mango; pull one of the mufflers off and listen...Al
What these guys ^ said! Ditch one muffler will give you what you seek! The second one is probably just functioning as a resonator anyway! 
I think Henry did the second becuase he thought it would be too noisy for me/Sandy. I think this is with One Muffler.
Sometimes what sounds great with the top down doesn't sound so good with the top up.
Ok, I just went for a nice top down cruise after work. The exhaust sounds are very pleasant. Would be nice to turn up the volume sometimes but for know I think its best to leave stuff alone and enjoy.....
Until the next itch needs to be scratched 
The next time you feel the need to spend money on Speedster stuff, just send me a check. I'll put it to good use.
Sounds awesome if you ask me!
Marty, sometimes I think you have too much time on your hands. You need to take up a hobby.
Ron-
Too complicated. I've got this:
http://www.summitracing.com/pa...qtp-qtec25/overview/
Easier. I've got one. It's a whole lot of fun.
Marty, sometimes I think you have too much time on your hands. You need to take up a hobby.
I would love to. What do you suggest?
Ron, that looks pretty cool. Getting rid of the drone is appealing. Drone is more noticeable with the quiter H20 engine. This is from their site.
http://www.dynomax.com/soundsofdynomax.php?video=msl
Stan, where does that get installed looking at my current setup? Does it bypass the muffler?
I put mine in front of both mufflers. It's wide open when I flip the switch. There's no horsepower gain (as proven on the dyno)-- but my oh my does it sound good.
The open-pipe Harley crowd seems perplexed when I crack 'em open beside them on the highway.
Stan, you need help!
But then again, so do I!
Those electric exhaust cutout valves look like fun. I have a neighbor with a Harley that deseves a little payback. Do you "T" them into the main tube before the muffler(s) then just bolt on a turndown? I started up my car with the portion of the exhaust with the muffler off during the last valve adjustment and it sounded like a dragster.
Oops, just found the other parts on Summit, and my answer. I may have some fun with this. I want to change out my aftermarket exhaust tip anyways and go back to a straight pipe as the tip on there drags going up some driveways and the impact has caused a few other welds on the heater boxes to snap off.
Stan I'm guessing that I can put that setup between my two mufflers? This way I can have a Sandy switch and a Marty switch. Where do you have the switch and what does it look like up close? Also, do you think it'll fit? look at my picture in the first post. Thanks.
Stan, Can you post a pic of your exhaust with this installed? It can wait till after church of course, I would not want to upset Jeanie
.
Marty G. Livin the Dream
"I would love to. What do you suggest?"
Marty, I suggest you take up dulcimer playing. It's a great way to unwind and much more manly than knitting, even though Roosevelt Grier supposedly did it.
