Skip to main content

Replies sorted oldest to newest

According to the hubs available on the CIP1 website, from '60 to '70 VWs had 40 splines on a 20 mm shaft; from 71-73, 40 splines on a 21 mm shaft; from 74-79, 40 splines on a 17 mm shaft.

I wanted a shorter hub than the one that is typically used with the angled VW turn signal arm because I am using a '67 bus turn signal switch that comes straight out from the column. I am combining a nice polished aluminum Nardi to Grant adapter with a Grant hub. The total length will be about 2"
Post Content
×
×
×
×
Link copied to your clipboard.
×
×