I lost one of my nipple hubcaps and ordered a new one. The Porsche emblem is fastened to the hubcap with those little tiny fasteners that push on one way, but then won't come off.
Well, I was so much in a hurry that I put the emblem on upside down!
Does anyone know how to remove those little fasteners?
Replies sorted oldest to newest
Yikes! I think you're going to have to: 1) turn the car upside down, maybe on something soft like blankets or cardboard; 2) put the hubcaps on; 3) turn the car right side up (so the big rubber circle thingies are touching the ground). That should fix the problem.
or always view the car using a mirror?
I looked at while standing on my head and it looks fine.
Put the rest of them on upside down and forget about it.
Move it to the other side and it will be fine there.
WOLFGANG posted:Move it to the other side and it will be fine there.
Won't it be inside out?
Buy Fuchs
Sell it to someone in the southern hemisphere.
I say walk around the hub cap 180-degrees and look at it again; it will be correct from that view. Then send us a photo to verify it.
Sorry, I think your stuck with it. No matter how I turn or hold my iPad, it’s still upside down. Bummer.
Mount each one 90 degrees around from the last one. Then you will be wrong all the time.
Hey, I know everyone here means well… but after trying the various ideas (flipping, turning upside down, etc) I'm in a worse mess.
The hubcap is now correct but the car is now a right hand driver!
Cole Thompson- posted:
The hubcap is now correct but the car is now a right hand driver!
Don't panic.
Drain all of the gas out of the tank and refill with petrol.
Remember you can only buy petrol by the liter, so you'll need to work out the formula for conversion from gasoline gallons to petrol liters. You may also need to exchange dollars for some european currency as well to pay for it.
Also, the postal department has some nifty attachments they use on delivery vehicles that will allow you to still drive from the left front seat. You just have to turn the things over and install.
If only you had mounted that damn thing correctly!
"Nothing is wrong with your monitor we control the horizontal we control the vertical "
Instruction to correct problem : ........Please invert your monitor 180 degrees
