NOW AVAILABLE... Polished Aluminum Footpegs

I'll PM you, Bruce, to figure something out.

PayPal is easy to set up...

OK.......PayPal assures me that I can receive payments to my account. You will need my name and email address, which is: Bruce Williams, bajadolphin7@yahoo.com

Bruce,

 

so PayPal is all setup On your end? 

If so I'll send you a payment for one.

When can you ship it once you get my payment and provide tracking info?

Please let me know.

 

Thanks

Steve...Pal is set up. Once I see on my account that you have paid the $56.00 I will ship it USPS Priority Mail. The box is about 9X5X2" I will follow up after that with tracking.....Bruce

Bruce, I just sent you a PayPal payment and included my name & address. Please let me know when you ship.

thanks

George Page

Funds sent through Pay-pal  Thanks Bruce

The Post Office was closed today so I'll ship tomorrow. (Veterans Day)

The thought came up about shipping two Foot-Pegs in the same USPS Priority Mailer. A guy in France and another in England are considering getting two for the same shipping cost. I (In their case it's $24.00 US just for one)   I can get two in the box so if your interested in two let me know.

One for your passenger? One for a friend who lives in your area? ......Bruce

What a salesman! I hate to admit it but I never really thought about my favorite passenger/wife's foot comfort. She's pretty short and I'm sure would appreciate a foot peg located at a position just for her.

i'll take another and will send a PayPal payment. is it just another $50.00?

Thanks for the suggestion.

GWPage

Bruce...M.O. in the mail

 

Maybe now you can turn your thoughts to engineering and fabricating a short, narrow clip-on sun visor for the speedster?

 

Or, how about a 'shelf' that tucks under the dash and extendes from the steering column over to the passenger side of the cockpit with a clearance depth of 3 or 4 inches for maps, official Handicap Permits, cell phones...and the sun visor you're going to design!...Huh? 

 

Carl you must of forgotten something that can be made in billot aluminum... Ray

I forgot Carl, iPhone holders, cupholders shift knobs. really nice door lock pins..

Ray,

 

I've thought of (but didn't mention) cup holders because in the speedster I can't imagine where the devil it could be installed!

 

There's simple no easy access location for it...so I've resorted to a screw top thermal cup (a little nipple to suck the juice out of, and prevent massive spills) and cradle it snuggled into my crotch!

 

BTW - speaking of innovative modifications 

Luis fabricated two sets of neat curtain windows for his speedster. One for the soft top the other for the hardtop. Beautifully done (Check out photos of his speedster) and he shared with me the 'source' of obtaining the pegs...they actually exist!!!

 

Now, if that upgrade is combined with Lane's rotating vent... but wide enough to stick your arm through to pay for tolls...Hummm?     

Carl I have the Santana fold away into the kick panel type and they work for a small cup at the coffee shop but... when I am using a push to drink, if it falls no drip type of coffee cup and that works the best putting our heads together we might be able to design something that can be slid out or something then hidden when not used.

 

I have an IM roadster so I have roll up or power windows so that is not an issue for me Ray 

under the seat front between the legs

Or buy something like this for your coffee cup and either mount it to gear shift or emergency brake.
http://cycleplicity.com/produc...yii8kCFQqFfgodn28MsQ

or another option
http://www.bonanza.com/listing...Oji8kCFUprfgodtH4D7w

Porsche 911 had a cup holder that would bolt unto the passenger seat and could hold a cup near or on the tunnel side.  Not used when a passenger was in the car as it was In the way of the passenger somewhat. In any case, dreaming is what allows you to come up with stuff

These were the best! I wonder if he still makes them..

 

 

https://www.speedsterowners.com...-santana-cup-holders

I can highly recommend the OXO coffee mug.  The stainless one is indestructible, keeps coffee hot/warm for hours, and the seal/sip mechanism is convenient and DOES NOT LEAK! A little pricey, maybe, but it is the right tool for the job, IMHO.

 

http://www.amazon.com/OXO-Grip...s=oxo+coffee+thermos

Carl...Thanks for the order. The clamp on sun visor prototype is finished. Now it's a matter of getting the CNC guy to cookie cut a bunch of the clamps. The acrylic visor part is easy. I have wing windows that clamp on with the same mechanism. I sold the prototypes to a guy who put his Speedster in the SEMA show last week. I'm getting emails from some of those people now. My wood pattern for some really cool inside door pulls goes to the foundry tomorrow. That will be my next presentation on here.

 

I was excited to hear you mention a "Shelf" under the dash. I have a drawing for one now. It will be made of Teak or Oak with a real "Hex Pattern" wicker field in the center part....very attractive......this is what Beer and retirement do to me.

 

You know....the cup holders are a real problem in our cars and I haven't came up with anything yet. That one that Rusty posted is the best I've seen so far but it's a little pricey IMHO........Anyway...upward and onward......Bruce

They are still available, I have a set but they go up and down instead of sideways.  ... as I mentioned they do work but the cup size is somewhat small and even though you have them they are not that convenient with sometimes giving problems to put the cup in properly or taking it out...... just saying... 

 

In my opinion, the best holders are where the modern cars have them but in our cars these will do... if you want a larger insulated cup as shown below....well they won't work .. . Here is my favourite cup... 

Hey Aircooled Bruce, can you send us a link where we can all your creations Ray 

Ray.....I don't even know what a link is, much less send one. What I planed to do is to have a friend of mine help me build a little web page to show my "Wares" so to speak. I would like to have 6 items to show at that time. This plan isn't too far up the road either. Here's a couple prototypes. I think the inside door pulls are really cool but no photos of those yet.......Bruce

Now that sh*# is cool.  I think I'd get me some of those wind wings.  The color would go nice w/ my paint.  Trouble is, these one-off custom cut do-dads end up being expensive, so they do need to be REALLY cool.  And these seem to cut that mustard.  Standing by.

El Frazoo....Keep in mind that I cannot get my friend to engrave those Porsche Emblems on any of these that I sell. He only did it as a onetime favor for me. They will have the border line though. Clear ones are very nice looking as well. They sparkle in the direct sun......Bruce

Yeah, I get it about the trademark, etc.  Don't need it.

I really like the wind wing and visors!

Why can't money just grow on trees?

Bill....it can !  You just got to plant them ! And water them, And trim them and baby them, and nurture them, and provide care and sustenance, and love and communicate with them in a meaningful way,and guide them thru all the stumbling blocks along the way, and be a mentor, and, and ,and ,and .....you know what i mean....and in the end Pay Day !!!!!!!..........Bruce

Ya I know, used to grow that $hit in "HIGH" school...Some of Hawaii's finest!

I'd like the wind wings too.  Clear for me, no border, no engraving.  Very cool addition.

They do look really cool and well made. Congrats!  I would love to see the visor working... does it move easily to adjust at all?  Ray

Those wind wings could keep some rain out of the side curtains with a little rubber.

Frank C.....Clear will be the Standard. Colors will be extra and there are dozens of colors to choose from and some of those are really expensive. i haven't figured out how i will be able to accommodate those deviations from clear yet.....Bruce

Ray @ Caretech-IM.... How the visor and wind wings move and adjust to numerous static positions is proprietary information at this point but i can assure you that it is simple and easy to do and to maintain in the future should you buy a pair. That was the biggest obstacle to overcome in my development of these accessories.....Bruce

So what price and time frame might we be looking at Bruce??

Sorry Bruce, no trade secrets demanded I was just enquiring... if once installed the visor works like a normal visor and would be easily adjusted for sun blocking... It would have to be coloured to be effective. Ray 

"colorured" Ray?

 

South of the border the options would be colored...or opaque.

Carl

 

We Canadians spell it coloured, not colored.  There are still a few subtle but important differences between our English and yours.

 

So, don't U forget it...

 

Yeah Bob I know...just josh'in.I also thought there were differences in political savvy until you guys elected Trudeau!
BTW, an opaque sun visor the same color - ooops, colour - as the vehicle might be cool...or would that be coule ?


On Sunday, November 15, 2015 9:23 AM, SpeedsterOwners.com <alerts@hoop.la> wrote:


Reply By Bob: 2015 Intermeccanica S6: NOW AVAILABLE... Polished Aluminum Footpegs== To reply by email, write above this line. == Hello, Carl Berry CT.: We're sending you this notification because you are either following the forum, the content, or the author listed below. New Reply To Topic
| Subject: NOW AVAILABLE... Polished Aluminum Footpegs Reply By: Bob: 2015 Intermeccanica S6 In: Speedsters / General (Non-Technical) | |

Carl We Canadians spell it coloured, not colored.  There are still a few subtle but important differences between our English and yours. So, don't U forget it...    View This Reply Sincerely, SpeedsterOwners.com - 356 Speedsters, 550 Spyders, Replicas and more https://www.speedsterowners.com To adjust your email notifications for this site, please update your notification settings. To suspend ALL email notifications from this site, click here. Powered By Hoop.la