Projekt Hoopty -- small but important stuff getting done

These are the door latch pulls, brake cable supports off the axle tubes and the skin for the front of the footwell. Details are captioned on the photos.
There's a chance the brackets supporting the cable runs might benefit other swing-axle folks, the door pulls are a thank-you to Angela for a suggestion to check out the cabinet door knobs at the hardware store and there's a shot of the footwell front panel in the rough.
The footwell sheet metal probably won't interest anyone at all. ... Nonetheless, it took long enough to cut the damned cardboard template and transfer it to the aluminum that I had to share the photo.
Keeping the faith; should be done with fabrication in another day or two ...

Hey Cory, what thickness aluminum are you using for your footwell panel?

thanks

16-gauge for everything except the diamond plate on the floor. That's 14-gauge, since nothing but the floor has to bear any kind of load.

thanks Cory!