Red Idiot light wanted

Hello Bill,

What exactly do you mean? Red idiot light wanted? Most idiot lights are clear and the housing has a colored lens on it.  Do you not have the standard 356 Replica gauges?

Ted

VDO. Stand alone to match my green (turn signals) and Blue (high beam) currently wired as the oil pressure warning light. The blue is impossible to see during the day when lit.

Something like this?
http://www.delcity.net/store/L...vv0MICFRCTfgod658AVA

I believe this is what you want, almost at the bottom of page under the heading ( Warning Lamps).
http://www.sracing.com/Store/G...uges_Instruments.htm

Close Jeff

I'm hoping to find one like the current ones I have that came with my CMC.

If not I'll replace them all to match.

I need a picture then. lol

Bill is this your dash configuration?  Attached image is on my "56" CMC wide body.  Top two are orange L & R turn signal. 

Less noticeable are Radio Shack's small 12v LED's they are about 1/8"  I remove and discard the chrome nut and drill a hole that allows for a tight push in fit.

Virtually every red light in Charleston is an idiot light as you can count on at least one person to run it.

Oh wait...  That's not what you meant, is it?

What is the diameter because this looks like it but the picture is still tough to see detail.
https://www.google.com/shoppin...amp;ved=0CIYBEKYrMAE
http://www.jegs.com/i/VDO/918/...SZ1cICFRJcfgodFjgAvA

Well, for short money you could replace all of the with LED's:

http://www.speedwaymotors.com/...5-16-Inch,35237.html

These are similar to what I use ( I get them at Radio Shack )  

http://www.speedwaymotors.com/...-5-32-Inch,3034.html

 I do like the non bezel look though.

You just need to ensure its exact same size or slightly larger or you're stuck with patching a hole in dash.