Does anyone know how to remove the seat from a VS. Normally a Beetle seat just slides forward off the tracks. I can't seem to do the same with the Vintage seat!?
Original Post
Replies sorted oldest to newest
Does anyone know how to remove the seat from a VS. Normally a Beetle seat just slides forward off the tracks. I can't seem to do the same with the Vintage seat!?
I've been trying to figure that out myself.
J-P
J-P
Hi there,
Have you looked at the floor board from below? There may be bolts through the floor pan that need to removed. If they are rusted, best to spray a rust penetrator like WD40 and leave overnight.
Good luck,
Tenzin
Have you looked at the floor board from below? There may be bolts through the floor pan that need to removed. If they are rusted, best to spray a rust penetrator like WD40 and leave overnight.
Good luck,
Tenzin
They are using the stock beetle track.
The bottom cushion pulls up and out. Pull hard!. Under it are the bolts.
-=theron
-=theron
I was afraid it would be something like that. Thanks Theron.
I welded bolts on the seat bottom onto the bottom rail so that the seat slides out completely. No more bolts to remove. It's so much easier. Now when I pull forward the whole seat with track slides off the rail.
Great idea Mike. Thanks