Reuters badge fitting

I'd use stainless steel bolts with nuts on back.  I like different heads than slotted or phillips for security and cleaner look.

Re: Badge placement:

From C. Hines:

Here is where we place ours, please let me know if you need clarification on anything: 

Front Porsche script: 1 3/4" below the front hood opening (to bottom of script), centered on the hood handle

Rear Porsche script: 2 1/8" below the engine lid opening (to bottom of script), centered on the engine grill center

1600/Super 1600: 1 1/8" below the Porsche script (to bottom of 1600 script, to middle of Super 1600 script)

Reutter badge: PS only, 2 3/4" above the bottom door gap (to bottom of Reutter badge), 1/4" left of center

Speedster emblems: inset 2" from door gap, 3/4" above belt line trim (this is the only location that we "guess" on, all other were pulled from my original Speedster #83511)

Hope that helps,
Ted

i decided not to drill my paint to attach mine.  i instead used weather stripping adhesive and cut off the heads of rivets and epoxied them on.

Thanks guys!