Schematic line drawing of a VW pan

Does anyone have of a schematic line drawing of a VW pan. I would like to model up the pan in the computer and working from pictures is difficult. I can only find an ISO views in all my books.

Thank You

Mark, when it's about the shortening of the chassis this might help. The sizes are in centimeters/millimeters.

Thank You, Shortening the pan will be my next step. First I am going to try to model the original. Then I will shorten the pan, using the v-cut and the straight cut methods. I am hoping to model the pan close enough so I can see witch method is stronger in bending and torsion.

Mark, look what I found in file Impala!

Thank You, so much this will save me hours of running into the garage and measuring sections and running back to the tube.
This is exactly what I was looking for.

The front centerline is actually about 6" back from what 1st shows on the drawing as the line on the drawing is for the torsion tubes and not for the trailing arms behind it.
JiI