Skip to main content

Classified postings do not allow for discussion (replies are not allowed).  Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program. 
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.

For sale are a set of 16" (7" & 8")BBS 3 piece modular wheels. See attached photos.

These wheels sold new for around $5000 for the set and was used on Porsche 911 Carraras. Here is a link to some info on them. http://www.bbs-racing-wheels.com/Seiten/htm.Txt/rsE.htm

The Porsche center caps run almost $100 alone and they come with the Factory BBS center cap wrench.

I paid $1200 for the set and had brand new zero miles Falken Ziex ZE512's (215/40ZR16 fronts and 225/40ZR16 rears) mounted and high speed balanced at a cost of over $400. The front rims are 7" and the rears are 8" and when installed on my Speedster fit without any clearance problems (my car has approximately 2" wide spacers/adapters (4x130 to 5x130 front and rear)

The wheels are super light weight and in excellent used condition with no road rash. I will probably list them on ebay for $1500 for the set of wheels and tires plus shipping. If you are interested or know of anyone else in the Speedster community who might what them please let me know. I think the wheels have a little more "classic" look than my BBS LM wheels.

Per Hans
1SXE-TUB
Original Post

Replies sorted oldest to newest

For sale are a set of 16" (7" & 8")BBS 3 piece modular wheels. See attached photos.

These wheels sold new for around $5000 for the set and was used on Porsche 911 Carraras. Here is a link to some info on them. http://www.bbs-racing-wheels.com/Seiten/htm.Txt/rsE.htm

The Porsche center caps run almost $100 alone and they come with the Factory BBS center cap wrench.

I paid $1200 for the set and had brand new zero miles Falken Ziex ZE512's (215/40ZR16 fronts and 225/40ZR16 rears) mounted and high speed balanced at a cost of over $400. The front rims are 7" and the rears are 8" and when installed on my Speedster fit without any clearance problems (my car has approximately 2" wide spacers/adapters (4x130 to 5x130 front and rear)

The wheels are super light weight and in excellent used condition with no road rash. I will probably list them on ebay for $1500 for the set of wheels and tires plus shipping. If you are interested or know of anyone else in the Speedster community who might what them please let me know. I think the wheels have a little more "classic" look than my BBS LM wheels.

Per Hans
1SXE-TUB

Attachments

Images (2)
  • BBS RS1
  • BBS RS3
so - what is the bolt pattern? 4x130?

That is a really good price. i bought a set of knackered RM's ($1000), redid them ($450) and then bought new toyo tires ($650).

$1500 is a killer deal for RM's let alone RS's

i could put you in contact with a buyer pretty quickly if you would like.
Post Content
×
×
×
×
Link copied to your clipboard.
×
×