speedster dash script to porsche script

I think someone else tried this a while back... I thought they said the holes were 180 degrees off. (Swapped inverted...)

Or... Wait.. that might have been the Intermechanica script vs. Porsche dash script...

Disregard

Http://cdn.shopify.com/s/files...024.JPG?v=1398361073

Looks like th dash emblem pins are about an inch in, on each 'spear' and then an inch in from the side of the rectangle.  The Speedster fender script has a bunch of pins, 5 or 6. I will have to look, but they are not symmetricly placed.


Sorry I don't have a definitive answer.
Ted

They do not line up.  None match, (well obviously,one post will match one existing hole, but then you are stuck with that placement.)   see the links, the photos show the posts

 

http://www.aasesales.com/products/h1b-101031

http://www.aasesales.com/colle.../products/h3i-104070

 

One additional comment, since the Porsche bar is mostly a solid block, you probably will cover some of the old speedster holes.

 

Art

I see what you mean thank you that is the only site that I've seen pictures of the backs

 

thanks!!!!

 

jane

If the new script covers the old holes, you could just use 3M dual-sided tape.  You would need to remove the pins on the new Porsche script, however.  I have used the tape on body emblems, and it does work.  On the dash, should be no problem.  If the old holes aren't covered, you would need to fill and patch.

Here's another idea http://www.amazon.com/gp/aw/d/...494172&robot_redir=1

I wanted to stay away from filling any exposed holes but being white may be harder to detect i did see on the Sierra madre site the dua-sided tape made in Germany that's supposed work nicely.