CMC speedster on '69 IRS pan - chassis and titled as same.:
1500 motor w/ 3:88 R & P transmission, Monza exhaust, "J" tubes, mahogany steering wheel. Drum brakes, Type III gauges. Nipple caps.
Light dove gray with black interior. Doors hood and deck lid all have a good fit. Car starts and runs.
What needs to be done to complete the car:
Wiring is 70% installed with the remaining wiring labeled by a previous owner. I just the black speedster style seats & door top rails upholstered. New door panels were made & will also need to be installed as well as the black factory carpeting & bumper deco moldings .
There is a top on the car but is slightly short of the windshield but does cli[p onto the windshield frame. On similar speedster projects I've been able to adjust the metal bows a bit to allow proper top to windshield frame fit . I would suggest changing out the Type III gauges for a more period correct set of 356 gauges. Will need misc. speedster scripts, side curtains assembled and body side trim.
Normal service items that will need to be done:
Safety check brakes, full engine service to include a tune up, valve adjustment, oil change and dial in the carb.
This is an elementary easy to complete speedster project for a first time speedster owner This allows you to become acquainted with speedster ownership before purchasing a new speedster. I have another current speedster project that I am to complete for Carlisle and time is on the short side.
In Chambersburg, PA. If it doesn't meet the eBay reserve I'll let it go for $9,600. firm.
Original Post