Hey gang,
Pan based IM..Trying to diagnose a steering problem. When turning it has a flat spot and the car initially doesn't want to turn, it then eventually grabs and makes the turn. I replaced my steering box which didn't solve the problem.
I noticed yesterday that when I push the top wheel in and out (under load) I have 1/4 inch play between the upper torsion arm/torsion tube. It has an adjustable beam and I tried tightening the adjustment screw but this didn't help either.
Any ideas what is causing this? Could this be a torsion bearing issue? Doesn't seem to be much info in the Bentley manual or John Muir's book.
Thanks,