Skip to main content

Technical Term Explanation

Rotate anticlockwise. > Clamp with mole grips then beat repeatedly with hammer anticlockwise.

This is a snug fit. > You will skin your knuckles!

This is a tight fit. > Not a hope in hell matey!

As described in Chapter 7... > That'll teach you not to read through before you start, now you are looking at scary photos of the inside of a gearbox.

Pry... > Hammer a screwdriver into...

Undo... > Go buy a tin of WD40 (catering size).

Retain tiny spring... > "Jeez what was that, it nearly had my eye out"!
Press and rotate to remove bulb... > OK, that
Original Post

Replies sorted oldest to newest

Technical Term Explanation

Rotate anticlockwise. > Clamp with mole grips then beat repeatedly with hammer anticlockwise.

This is a snug fit. > You will skin your knuckles!

This is a tight fit. > Not a hope in hell matey!

As described in Chapter 7... > That'll teach you not to read through before you start, now you are looking at scary photos of the inside of a gearbox.

Pry... > Hammer a screwdriver into...

Undo... > Go buy a tin of WD40 (catering size).

Retain tiny spring... > "Jeez what was that, it nearly had my eye out"!
Press and rotate to remove bulb... > OK, that

Attachments

Images (1)
  • Image011
Post Content
×
×
×
×
Link copied to your clipboard.
×
×