top stud mount location

My CMC instructions say to install the top snaps in the body 1 back around the rear of the tub, however this seems a bit close

Is this correct?

You don't say 1 what.

One inch seems to be OK.

One mm or cm would be too close.

One inch from the edge of the tub.

CNC manual states 1" from the rear lip, if you do 5/8" - 3/4" you'll move the top slightly forward toward the windshield. You'll have a better side curtain to top fit, more top material to work with at the header bow and the side flap to windshield. I don't install the last two snap studs nearest to the door edge until I've installed the rest of the top, again for a better fit. Alan

it's all documented (my site)

i did just over 1"

i'd suggest using tenax fasteners too. they are bloody slick and secure at he same time

Tenax - I will get some now that I know the name

Thanks once again for all the help

English and German Tenax are a bit different.

English are cheaper.

I bought English ones from here:

http://www.vintagecarparts.co.uk/en/list+upholstery+and+trimmings~cloth+fasteners~tenax/

Is is a good idea go get a few extra studs. They twist off easily.

Lube them when you screw them in.

Rather than just picking a drill bit that is close, measure the groove on a Tennex fastener thread and use a number drill bit that relates to that measurment, that's the most correct way. ~Alan

Michael - good call on supplying the link. i picked mine up there too. shipping is a bit long from the UK, and as an FYI - I'd call my order in with these guys. the info you supply via their 'secure' website gets transferred to email (incredible insecure).

i wish i picked up more stuff from them too when i did my order. lots of good trim pieces, seals, etc.

if security an issue, has anyone tried a pre-paid visa for specified amount? curious if that could work.