Skip to main content

Replies sorted oldest to newest

go to a water jet cutting service and have them duplicate the font. You cannot have a combo smooth/textured surface as in the "Speedster" dash emblem, and only that of the native material. Paint, powercoat or plate as you prefer.

Easy and cheap. I am in Thailand so by the time I import emblems the cost doubles, and locals like to finger them, so this is what I do for all the emblems. Use double sided tape to stick them on.

Your manufacturers may not want to deal with such a piddling order, but not the case here where every bhat counts. I am coming to Canada and the USA for all of Aug and could bring some over if you wish.
My cost to water jet only "Porsche" from steel was 450 B (15.00) so "Vintage" would be about the same plus a small cost for art work and maybe a surcharge for a small run. In any case it will be cheap

I will not do this without permission from Kurt at Vintage, so you need to obtain that first
Let me know

Along the same lines, can anyone send me a scan or better yet a raster drawing of "Carerra"
Post Content
×
×
×
×
Link copied to your clipboard.
×
×