Skip to main content

Replies sorted oldest to newest

I have a VS, and I was given the same pain code by Kirk in 2013, as well as a 12oz can of the paint when I took delivery.

i did have to touch up some rock chips this summer, and though it looked darker in the can, once applied/cured it blended the rock chips seamlessly.   

Before attempting to touch up the car using the old paint/ or buying new one--- I did go through the process of going to a PPG paint /body shop with  scanning/ matching tool capabilities.... and after they scanned the car paint, and a card they had sprayed with the older 2013 mix, they told me there was no need to buy/mix new paint... they told me I had the right code... but the tricky part of metallics is matching the "sparkle/flake".  

 I ended up letting the paint shop touch up the rock dings ( they offered that service-- not a repaint, but a rock ding repair/touch up service). using the paint I had brought in and they had tested.  They did a wonderful job.  So good that if I had not taken pictures of where the dings were I would not have known during my walk though were to look.

Find a PPG shop with a paint scanning tool... they should be able to confirm and mix what you need.

Good luck.

Add Reply

Post Content
×
×
×
×
Link copied to your clipboard.
×
×