I tried to find a brass plug for one of my carbs but came up short. Where can I find one of these? Or, what's the thread type/pitch etc, so I can get some aluminum ones?
I'm going to redo my fuel line routing so that the fuel lines come from the firewall from a T. Currently it goes to one carb then follows the top of my shroud to the other carb. Me no likey.
Replies sorted oldest to newest
@edsnova got any spare brass thingies?
Take the inlet nipple to a NAPA and match the threads? Of ask the expert @DannyP?
Weber IDF fuel inlet blanking plug:
https://www.carburetion.com/pr....aspx?Part=61002.022
You'll need the crush washer too, but you can also re-use the one off the old fuel nipple.
https://www.carburetion.com/pr....aspx?Part=41535.003
I highly doubt that NAPA or any other box auto store would have this pretty specific item. It's probably available from EMPI also, but I couldn't find it.
Carlos, If you can't get a new one I might have one. Let me know.
Thanks @DannyP.
@JMM (Michael) posted:@edsnova got any spare brass thingies?
Wow, I responded while on covid lockdown in a hotel room. I guess covid brain is real. Of course it wasn't Ed, it was Lane @Lane Anderson that is famous for (not) locating brass thingies. Both excellent fellows by all accounts. My apologies to both.
Funnily enough this time ED knew that Danny would know, so in fact Ed did kinda find a brass thingie this time. This is such a cool space.
Glad I made it through the fog back to land. Don't mess with this stuff, it's serious business.
