WTB: CMC/FiberFab passenger side window

I drove home this weekend and installed my top. On the rainy ride back, my passenger side window decided to leave me. There's only about 3 inches of water on my floor now.

So, if anyone has a spare passenger window, or knows where I can find one, that would be great. I'll probably be in Carlisle this weekend.

Adam.
http://www.mcmaster.com
Clear cast acrylic sheet .118 thick, 12x36
mcMasterCarr Part # 8560 K193

is what I used to replace one that I broke.

You still have to find the rubber and hardware.
I think you can find the rubber at JC Whitney.

Greg

The 2 brackets to connect to the door will most likely be difficult to find (although many opt not to even build the side curtains for what little they do). Do a seach here on the FORUM for "side curtains". There was someone who build some nice fitting ones and made nice brackets --- even bent the "plastic" (Lexan/polycarbonate) for a better fit. Suspect you can make new ones that are big improvement over old --- think the originals had leather tabs with snaps thay snapped them to the inner door panel so they wouldn't fly off at speed. Boy - you were into the ride if you didn't notice the burst of fresh air when it flew off!