Looking for the front end off a ball joint VW frame, the "yokes" that the beam bolt up to. Anyone able to help me out? PM at Brian_PuskasATgov.nt.ca. Thanks.
Original Post
Classified postings do not allow for discussion (replies are not allowed). Direct message the member if you would like to discuss the item.
The Classified section is open to any individual (non-commercial firms) posting of items for sale. Members posting commercial advertisements must be enrolled in a Supporting Merchant program.
Postings without relevant details (PRICE, location, condition, etc.) will be deleted.
Replies sorted oldest to newest
Looking for the front end off a ball joint VW frame, the "yokes" that the beam bolt up to. Anyone able to help me out? PM at Brian_PuskasATgov.nt.ca. Thanks.
PM sent....
What you want is a "frame head" assembly, about $150 + - but a pita to weld back on as it needs to be positioned correctly amd requires a lot of precise measuring.
If you have carefully checked and all you need is the beam cup receivers(rust?) on the frame head, you can cut the bad pieces out and spline in a new section from a replacement frame head and limit the welding. ....the beam cups must be replaced flush . ~Alan
What you want is a "frame head" assembly, about $150 + - but a pita to weld back on as it needs to be positioned correctly amd requires a lot of precise measuring.
If you have carefully checked and all you need is the beam cup receivers(rust?) on the frame head, you can cut the bad pieces out and spline in a new section from a replacement frame head and limit the welding. ....the beam cups must be replaced flush . ~Alan
Looking for them to have a subassembly welded up to adapt my new front end to the IM frame. I'll have to cut off the front of the IM frame also, a bit hesitant.